• Safety transformer
  • Manufactured according to the standard 61558-2-6 IEC Certificate
  • Transformer with circuit separation.
  • Protected against overloads and overheat by a built in thermal protector with self resetting system.
  • Electrostatic screen between primary and secondary windings.
  • Fully encapsulated in polyurethane resin.
  • Connection terminal for grounding.
  • Metal outer box protected against corrosion.
  • Degree of Protection: IP42
  • Class I.
  • Transformer for indoor built-it in use.
  • Cable compression glands are supplied for fixing the wiring.
  • Different options of holes for the connection of the installation to it.
  • Temperature: 40º C.
  • Insulation Class B (130º).
  • Windings: Class H (180º).
  • Dielectric Strenght ( Primary/Secondary): 3.500V.
  • Dielectric Strenght ( Primary/ Mass): 1.800V.
  • Galvanic isolation between primary and secondary.
  • Frequency: 50/60 Hz.
  • Primary Voltage: 230V AC
  • Secondary Voltage: 12VA AC or 12-13-14V AC ( Voltage adjustments in the primary)

 * Different powers and other voltages in primary and/ or secondary available under request.
*All specifications listed in this brochure are subject to change without notice

Technical specifications

The safety transformers PHONOVOX are destined for feeding submerged spotlights for the illumination of swimming pools, fountains … etc.

TP-10-P Series are safety transformers with IP-42 protection rate that allows their installation inside the control panel or on the wall of the pool room.

يمكن للتغيير جميع الخصائص الموصوفة دون إشعار مسبق